MULTiLOG ™

The MULTiLOG is a temperature monitor with 16 sensors that connects to your PC. Capable of recording a total of 2,000 readings at user determined time intervals. Sensor leads can be up to 200m long and the MULTiLOG will continue to log data even if the computer is switched off. Warning of wayward temperatures is provided by an audible signal from the PC or from the on-board sounder. An auto-dialer can be connected which will dial out to a telephone or pager to warn of out-of-hours alarm conditions. The sensors can be configured as digital sensors i.e. Open/Shut, On/Off for example, to indicate whether doors are open or closed at the time temperatures were recorded. Software controls the configuration of the MULTiLOG and printing of temperature reports. The MULTiLOG uses thermistor sensors to monitor temperatures in the range -30°C to +70°C (22°F to 158°F). at an overall accuracy of +/- 0.3°C

NEW - See details of the GSM AUTOdialler which can send warning of alarm conditions for sites with no landline telephone connection.

The MULTiLOG is used by food manufacturers and distributors, schools, hospitals, hotels and roadside restaurants and vaccine stores for monitoring fridges, freezers and cold rooms.

Existing users of the MULTiLOG should upgrade their software to at least V206 as this upgrade contains several important changes such as the way the Auto-dialler is handled.

Download MULTiLOG V20X Software upgrade (updated JUNE 2008).   (LARGE file: 12Mbytes)

Download MULTiLOG Manual (updated May, 2008) (pdf file)

Download Suggested Calibration Procedure (pdf file)